Fiber Laser Marking Machine Routine Maintenance

When the unit is not working, the Table Type Fiber Laser Marking Machine and computer power should be turned off.
When the machine is not working, cover the field lens lens to prevent dust from contaminating the optical lens.
When the machine is working, the circuit is in a high voltage state. If it is not a professional China Laser Marking Machine Manufacturer, do not overhaul it during startup to avoid electric shock.
If there is any malfunction of this unit, the power should be cut off immediately.
When the equipment is used for a long time, the dust in the air will be adsorbed on the lower end surface of the focusing mirror. The lighter will reduce the power of the laser and affect the marking effect; the heavy one will cause the optical lens to absorb heat and overheat and burst. When the marking effect is not good, carefully check the surface of the focusing mirror for contamination.
If the surface of the focusing mirror is contaminated, the focusing mirror should be removed to clean the lower surface.
Care should be taken when removing the focusing mirror, taking care not to break or fall; at the same time, do not touch the focusing mirror with your hand or other objects.
The cleaning method is to mix anhydrous ethanol (analytical grade) with diethyl ether (analytical grade) in a ratio of 3:1, infiltrate the mixture with a long fiber cotton swab or lens paper, and gently scrub the lower end surface of the focusing mirror. A cotton swab or lens paper must be replaced.
During the working of the marking machine, the marking machine must not be moved to avoid damage to the machine.
Do not cover the stack or put other items on the marking machine to avoid affecting the heat dissipation effect of the machine.
Table Type Fiber Laser Marking Machine

Comments

Post a Comment

Popular posts from this blog

Servo Cutting Plotter

Image
Servo Cutting Plotter The VICUT S series vinyl cutter  was special designed for users who require working with large plots and processing large quantities in professional quality. With a VICUT cutter plotter and DragonCut software you have a formidable combination of sign design and layout tools. The automatic media detection feature makes the cutter can continually adjust itself to allow for any skew or stretch within the artwork, to achieve long distance tracking. The back-lit LCD and large gel buttons ensure simple and comfortable usability. With 750g cutting force and unique mechanical structure, the vinyl cutter plotter can cleanly cut even the most challenging media such as high intensity reflective films.  vinyl cutting plotter   Features: 1. Strong frame: aluminum alloy construction, ABS end caps, welded steel stand. 2. Plug and play: simple installation, no additional driver necessary. 3. Long length tracking: strong structure and high-quality girt rollers to keep l
Read more

Digital Die-Cutting Solution

  With the falling of traditional die cutting, digital die cutting has been becoming the trend. VICUT devotes to providing integrated one-stop solution from printing to finishing.   l    Convenient Digital Color Label Press ANY002 ü    Faster output, faster delivery ü    High-resolution label printing ü    Prompt and convenient data processing ü    Effective and economical printing work ü    Interface and software   l    Widely Applicative Roll to Roll Label Press VRP300 ü    Precision color control system, continuous print setting possible ü    1200*2400 dpi high resolution ü    Speed up warm up time to save energy ü    Automatic pin correction for best performance ü    Lowest temp for toner adhesion ü    Low print temp for more materials possiblity   l    Roll Label Cutter VR30 ü    Compatible with any roll to roll label printer ü    64bit operating system supported ü    Professional software Label Studio ü    Automatic contour cutting ü    High recognition to even low-reflection mat
Read more

Influence On The Cutting Speed Of Digital Flatbed Cutter

Image
Cutting material is one of the important reasons that influence the cutting speed of  Digital Flatbed Cutter . Besides, it is also affected by the following factors, let  Digital Flatbed Cutter Manufacturer  tell you : 1, the cutting speed is affected by the cutting material Acrylic cutting machine is basically the processing of our plate is common, such as various KT board, Chevron board, honeycomb board, car stickers, adhesive, frame paper, gray paper, corrugated paper, EPE foam, PVC board, acrylic Plate, thick foam and so on. The cutting speed of the acrylic cutting machine has a great relationship with the nature of the cutting material. 2, the thickness of the cutting material affects the cutting speed In general, the thinner the cutting material is, the easier it is to cut and the faster the speed is. The cutting speed of the thin plate is faster than that of the thick plate. Therefore, the thickness of the cutting material affects the cutting speed. 3, whether the use
Read more